AMagic AES-S3504UE Manual do Utilizador descarregar pdf (Página 31)

4 CONFIGURATION

4.1 CONFIGURATION PREREQUISITES

4.1.1 SATA HOST CONNECTIONS

This guide assumes that you have already attached the AES-S3504UE to a host computer

that has been installed with the Sii3132 HBA (Host Bridge Adapter) or another third party SATA HBA with

Port Multiplier (PM) support.

If you use a host controller that does not provide Port Multiplier support (Such as Intel ICH):

• The CLEAN MODE storage policy is unavailable when configuring the AES-S3504UE. Only

one disk is available on the host computer.

• Virtual volumes that you create in the Advanced Configuration Wizard must use at least 8 gigabytes (GB)

of available system capacity.

4.1.2 USB HOST CONNECTIONS

If you are connecting your AES-S3504UE using a USB connection to your host, the USB port

should be compliant with USB 1.0, 2.0 or connected to a USB hub.

4.2 CHANGING HOST CONNECTIONS

The AES-S3504UE supports both USB and eSATA host connections, although only one connection

can be attached at any given time. For the best data transfer performance, you should always use the eSATA

host connection.

If it becomes necessary to change the host connection between eSATA and USB, the host computer system and

the AES-S3504UE should both be powered down prior to making the host connection change to avoid

any potential data loss or corruption. After changing the host connection, all items can be powered-up to resume

operation with the new host connection.

4.3 DISCONNECTING A USB DEVICE

USB 2.0 external devices provide support for “plug & play” connection, so that your USB storage device can be

connected and disconnected while the computer is running. To prevent data loss or other failures, you must

follow these steps when disconnecting your USB 2.0 storage device from your host computer system. Once the

physical USB device is disconnected, any volumes that are associated with that device will become unavailable.

On O/S (Opration Systems), the AES-S3504UE must be stopped from O/S before any devices can be

disconnected.

4.3.1 WINDOWS SYSTEMS

1. Click on the Eject icon (a small green arrow over a hardware image) in the System Tray located in the

lower right-hand side of your screen.

AES-S3504UE User’s Manual Ver. 091015

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

Sem comentários

AMagic AES-S3504UE Manual do Utilizador Página 31